Simple Frame Relay Configuration

Telekom ;

conf t
frame-relay switching (you are the frame-relay switch)

int s0/0
no ip address (because of layer 2 )
encapsulation frame-relay (encapsulation type)
frame-relay intf-type dce (dce or dte )
clock rate 64000
frame-relay lmi-type ansi (Dte to DCE which languange will use between them like cisco,ansi,q933a can be.)
no sh
frame-relay route 102 interface serial 0/1 201


interface Serial0/1
 no ip address
 encapsulation frame-relay
 frame-relay intf-type dce
 clock rate 64000
 frame-relay lmi-type ansi
 no shut
 frame-relay route 201 interface Serial0/0 102

R1;

interface Serial0/0

 ip address 12.0.0.1 255.255.255.0

 encapsulation frame-relay

 frame-relay intf-type dte

 frame-relay map ip 12.0.0.2 102 broadcast

 no shut

R2;

interface Serial0/0

 ip address 12.0.0.2 255.255.255.0

 encapsulation frame-relay

 frame-relay intf-type dte

 frame-relay map ip 12.0.0.1 201 broadcast

 no shut